Installation instructions:
1.preparation of the wall surfaces
make sure the wall surfaces to be smooth, flat,solid,dry and perfectly clean,we suggest creating a white base about 2mm.
2.preparation for laying
Score lines on the surfaces to help the sheef posited correctly
3.Laying
Using the straight of a trowel spread out the adhesive uniformly on the wall. Made sure the adhesive covered all the surface,one time should be not more than 1m2.
A-Mosaic mounted on paper
Install the mosaic sheets with the paper side facing towards you and then using rubber flaat to ensure perfect adhesion.Wet the paper with a damp sponge and then remove it gently.Take out of any excess adhesive before if dries by a small spatula.
B-mosaic mounted on mesh
Press the fiberglass mesh backing directly into the adhesive
4.Grouting
Using a grout for particular care.for paper-faced mosaic,ensure that tiles are thoroughiy cleaned and spread the grout using a rubber flo at.Make sure no more than 2m2of area at a time.And then leave the grout drying.
5.Cleaning
Using a damp sponge to remove any grout.
6.Cutting glass mosaic
Using mosaic nippers cut tile by tile.
Using a cutter for cutting the whole sheet.
7.Maintenance
Using normal neutral detergents for daily cleaning.
Using a slightly acidic detergent for special cleaning.